Hand Crafted in England * Quick Set-Up * Stable & Sturdy
Waterproof Bottom Segments * Flexible


What makes UNI-LOC Tripods and Monopods so special?

If you are and OUTDOOR PHOTOGRAPHER OR VIDEOGRAPHER and your tripod is wobbly or takes forever to set-up on uneven ground, you will love our fast set-up line of solid tripods. UNI-LOC tripods utilize a single bent-bolt locking system; this system locks the legs and center post in position with a quick twist. This bent-bolt system provides outstanding stability and balance that other tripods can’t. Our lower leg segments are fully sealed with spiked feet (toe-point) and can be immersed in mud, sand and water.

There are two tripod series, the Standard Series, which are constructed from 1-1/4” (30mm) outer tubes and 1” (25mm) inner tubes and the heavy-duty Major Series, which are made from 1-3/8” (35mm) outer tubes and 1-1/8” (28mm) inner tubes. The center column of both the Standard Series and the Major Series are one-piece, “System” tripod center columns have a swivel (hinge) for additional flexibility.

Select the Standard Series if the equipment that is being placed on the tripod weighs less than five pounds. If the equipment weights from five pounds up to twenty pounds select the Major Series. You will want to review the maximum working height, collapsed height and weight shown in the specifications.

FOR United Kingdom and European Orders and Pricing
UNI-LOC Products,
Cottingham Farm,
Flaunden Lane,
Bovingdon,
Herts HP3 OPD
UK

ring: +44 (0) 1525 372030 or email envoyuniloc@gmail.com

FOR
U.S., Canada and Mexico Orders and Pricing
UNI-LOC North America
6708 90th Street E.
Bradenton, FL 34202

phone: 1 941 928 0006 or email UNILOCNA@GMAIL.COM

FOR U.S. & North American UNI-LOC Tripod Pricing,
FOR U.S. & North American UNI-LOC Ball and Pan Head Pricing,
FOR UNI-LOC TRIPOD PARTS LIST.

phone: 1 941 928 0006 or email UNILOCNA@GMAIL.COM

  • UNI-LOC Standard Tripods
  • UNI-LOC System Tripods
  • Tripod Heads
  • UNI-LOC Monopods
STANDARD TRIPOD - FEATURES
Independent movement of the legs and centre column
  Ideal for use on uneven terrain
  Ideal for confined spaces
  Permits low level photography/videography
 
Single locking lever for legs and centre column
  For ease and speed of use
 
Rotational movement of centre column
  Use conventionally or many different positions
 
2-Section legs
  Equipped with well proportioned locking knobs for quick and simple height adjustment using just one half turn of the wrist.
 
Sealed lower leg section
  Allows the tripod to be used just about anywhere upto the first joint. Even in mud, sand, and water.
 
Spiked feet
  For optimum stability on software ground.
 
Twin platform centre column
  useful for adding a second camera or accessory
 
Offset leg head with serrated edges
  Offers better tripod stability
  Positive locking of head components
  Aids compact folding of tripod
 
Compatible with System Tripod components
  Can be upgraded to System Tripod specifications
   
UNI-LOC Tripod - Goes where your imagination takes you.
Water, mud or sand, the UNI-LOC tripod goes just about anywhere your imagination takes you. Sometimes, a little further too.
 
Model
Maximum Working Height
Folded Length
Outer Leg Diameter
Inner Leg & Centre Column Diameter
Weight
 
mm
inches
mm
inches
mm
inches
mm
inches
Kgs
Lbs
1600 TRIPODS        
1600
1530
60
800
32
30
1.2
25
1
2.4
5.3
                   
MAJOR TRIPODS
MA1220
1220
48
675
27
35
1.375
28
1.125
3.1
6.8
MA1600
1600
63
790
31
35
1.375
28
1.125
3.4
7.5
MA2300
2391
94
1040
41
35
1.375
28
1.125
3.9
8.6
SYSTEM TRIPOD - FEATURES
Modular Construction
The major components of the tripod may be removed to custom configure the tripod as desired. This allows freedom to create special purpose equipment supports. All components are available for purchase individually.
 
180 Degree Centre Column Angle Joint
  This is a very useful aid for low angle shots and confined spaces.
 
Double Side Tripod Platform
  This platform has two faces at 90° to each other.For low angle shots when the centre column is parallel to the ground, use this platform to mount the camera in an upright position.
 
3-Section Centre Column
  The centre column may be shortened to ease positioning in confined spaces.
 
Non-Slip Feet - For Indoor Use
  These are soft push-on feet that give added grip on smooth floors. They also protect delicate floor surfaces.
 
Platform Head Cap
  Protects the thread on an unused tripod platform and will allow a monopod to be used as a walking stick.
 
Two Monopods
  A folding monopod may be formed by connecting the centre column to a leg unit. A short monopod may be constructed using a leg unit and a platform.
 
Table Top Tripod
  This may be constructed using tripod components and an extra set of short legs. (Available as optional extras)
 
Other Accessories
  Optional legs, table clamps, flash accessory brackets and straps complete the range of SYSTEM products available.
UNI-LOC Tripod - Goes where your imagination takes you.
Fully configurable, 3 section UNI-LOC SYSTEM tripod, with multiple camera mounting platforms, and 180° angle joint.
This is the plaform that can grow with you, as your demands evolve and grow.
Fast and easy to setup and deploy.
   
Model
Maximum Working Height
Folded Length
Outer Leg Diameter
Inner Leg & Centre Column Diameter
Weight
mm
inches
mm
inches
mm
inches
mm
inches
Kgs
Lbs
S1700 TRIPOD          
S1700
1745
68.75
793
31.25
30
1.2
25
1
3.0
6.6
S1700/3
1575
62
616
24.25
30
1.2
25
1
3.0
6.6
S17700/3L*
2190
86.25
793
31.25
30
1.2
25
1
3.5
7.7
* Dimensions for a S1700 tripod fitted with the longer 3-section optional legs - not a stock tripod.
MAJOR System TRIPODS
MASYS1220
1470
58
730
29
35
1.375
28
1.125
3.8
8.4
MASYS1600
1800
71
830
33
35
1.375
28
1.125
3.8
8.4
MASYS2300
2500
98
1110
44
35
1.375
28
1.125
4.84
10.7
                     
TABLE TOP TRIPOD                  
TT
510
20
380
15
25
1
1.3
2.9
                     
UNI-LOC Tripod Heads
25 Ball Heads
  UNI-LOC #25 Ball Head With Quick ReleaseThis series consists of four compact ball and socket heads constructed with nylon cup to ensure a smooth ball motion. On the standard 25 ball head, a single locking lever locks both the ball and the revolving base. The revolving base on the new 25R ball head has a separate locking lever. Standard round platform and quick release versions are available for both types.
To fit 1600/S1700 Tripods, 1600 Monopods, Universal clamps.
 
30 Ball Heads
  UNI-LOC 30 Ball HeadsThe UNI-LOC 30 ball heads are made in a series of six heads divided into two categories: three revolving base and three standard base. Each combines a patented internal locking mechanism, nylon cups for smooth ball motion and locking lever to give positive ball lock. Ideal for 35mm, medium format, 4x5 graphic cameras & lightweight 4x5 monorails.
  To fit 1600/S1700 Tripods, all Major Tripods, 1600 Monopod, Major Monopods.
 
20 Pan Head
  UNI-LOC 20 pan HeadA light weight head with three-way platform movement, and quick release camera post.
 
35 Video Pan Head
  UNI-LOC 35 pan headA two way fluid efect pan head with tilt and pan actions being dampened for smooth operation. The head comes with a quick release camera plate and spirit level. The long handle may be locked in a wide range of positions.
 
Super Tilt Top
  UNI-LOC Super Tilt Top HeadThis head provides precise control over camera positioning, using movements around three different axes. The head is a cross between a ball head and a pan head, without any long handles to obstruct it's use. It is therefore ideal for close-up work. It is ideal for handling format changes on top of a monopod.
 
60 Ball Heads
  UNI-LOC 60 ball headDesigned for the larger camera formats and also for newer cameras with long heavy lenses, this series uses a 60mm diameter ball which runs in substantial nylon cups. Very positive locking is effected by a large round locking knob. A separate smaller locking knob applies frictional adjustment to the ball. Two verions are available, one standard and one with a graduated revolving base. Also available is a new large, easily located quick release camera plate.
 
 
   



MONOPOD - FEATURES
UNI-LOC Monopods

For those occassions when it may not be practical to use a tripod, UNI-LOC manufactures an entire range of monopod camera supports.

Two model ranges are manufactured, and both are available with 2 and 3 section tubes, both matching the diameters of the UNI-LOC tripod range.

All current UNI-LOC monopods come with a supplied wrist strap and platform cap.

 
Accessories
  Optional accessories include 180 degree angle joints, legs, clamps, flash accessory brackets, and of course the DuoPod attachment kit.
UNI-LOC Monopods. 3 section and folding type
3 section UNI-LOC monopod on the left and folding monopod with the 180° angle joint on the right.
   



 


One Click Away